Detail № 6

№ 6

An analog meter with a fan-shaped display. The hour and minute hands of the retrograde mechanism are placed coaxially. MIYOTA movement with the in-house module, which has hour and minute hands that return to zero instantly, a seconds disk in the center, and a date display to the right of the center.

To make the entire watch thinner, the hour and minute hand units are housed in the lower part of the fan-shaped glass (at the 6 o’clock position). The dial is fixed to the movement with screws so that the height of the dial and bezel are aligned.

New Specifications (2023~)

Design, materials, and manufacturing processes have been improved to enhance stability and durability. Exterior changes include beveling on both sides of the hour and minute hands, as well as on the bezel and the heads of the screws on the dial. The case material was changed from SUS303 to SUS316L and the glass from mineral glass to sapphire crystal glass. The buckle engraved with the brand logo and the specially designed strap were adopted. In addition, while four out of the eight screws on the bezel fixed the lugs in the first model, the new model changed the lugs to be fixed from the backside of the case with screws.

[NOTE]
・Always turn the crown moving the time forward, when setting the time. Don’t turn the crown the other way around when setting the time, for fear you should break it.
・When the hour and minute hands reach 0:00, there may be a discrepancy of up to 60 seconds in resetting to zero.

<Functions>
Retrograde hours and minutes, Seconds disk, Date
Winding: Automatic

<Movement>
MIYOTA 9015 and In-house retrograde module
(Automatic, 26 jewels, 28,800 vph (4 hz), Power Reserve: approximately 40 hours)

<Case>
Diameter: 42.6 mm
Thickness: 11.8 mm
Material: Stainless steel (316L)
Case finish: Straight graining
Case-back: Display back
Water resistance: 3 ATM

<Crystal>
Sapphire crystal (Anti-reflection coating, Anti-fingerprint coating)

<Strap>
Material: Calfskin
Lug widths: 22 mm

Made in Japan